GW1450 Series 5G Router

Compact 5G Cellular & WiFi Router

Download as pdf
Download as pdf

Applications:

  • Fixed line backup over cellular data network
  • In-vehicle WiFi & content streaming services
  • M2M fixed-site connectivity
  • Digital signage

Router Features:

  • Enhanced 5G connectivity
  • Concurrent 2.4GHz & 5GHz WiFi WiFi
  • Dual Ethernet
  • Dual SIM

Overview
The Virtual Access GW1450 5G Series router is a compact and rugged 5G router designed in a rugged extruded aluminium case with a mounting bracket for use in vehicles and site-based applications.
The GW1450 Series router enables 5G connectivity for applications such as passenger WiFi internet access, telemetry and WiFi access to corporate network services. The product is ideal for site-based locations offering primary WAN or cellular failover to fixed line connections. Its small size works for M2M applications such as remote monitoring and control.

5G Support
The GW1450 Series router has a very high performance 4-core processor to support 5G throughput speeds. It has an internal M.2 socket with USB-3 interface to the cellular module. Using a cellular wireless communication module with receive diversity to improve reception of RF signals; data connectivity is provided on 5G, LTE-FDD, LTE-TDD, DC-HSDPA, HSPA+, HSDPA, HSUPA and WCDMA networks with a standard PCI Express M.2 interface. In addition, the module has 4 cellular antenna sockets.

WiFi
The GW1450 Series router has integrated dual radio (2.4 and 5GHz) WiFi support. It can support both Access Point mode and Station mode concurrently if required.

Dual Ethernet Ports
The two gigabit Ethernet interfaces can be configured as a single interface with Ethernet switching between them or as separate router interfaces.Dual SIM
Dual SIM sockets ensure that a backup 5G/LTE network can take over should the primary network fail. The router detects a network problem and fails over to a standby SIM/APN.

SMS Management
The GW1450 Series router also supports SMS, so if the packet switched side of the network is down, you can send commands to the router to perform diagnostics or even a reload.

Automotive Power Conditioning
Vehicle battery voltages often experience transients and there can be substantial voltage dip during engine starting. The GW1450 Series router supports 9-36V DC input providing direct compatibility to vehicles with either 12V or 24V batteries. It incorporates an active power conditioner that is designed to accommodate the voltage dips, surges and transients commonly found in vehicle power systems.


Software Features


Management

  • Automatic configuration using Activator server
  • HTTP/HTTPS
  • Command Line Interface via Telnet or SSH
  • TFTP client download/upload
  • SNMP agent
  • SMS management support

Fault Investigation and Reporting

  • Event logging
  • Syslog support
  • Packet tracing

Routing Features

  • IPv4 and IPv6
  • DynDNS
  • NAT
  • NAT Traversal
  • Multiple VRFs
  • VLAN support
  • BGPv4, OSPF and RIP (v1 and v2)
  • NTP Client and server
  • Packet filtering
  • Firewall
  • Port forwarding
  • IPSec/L2TP/GRE
  • DMVPN
  • SNMP v1/v2/v3
  • TLS 1.2
  • 802.1x authentication
  • IEC104
  • QoS
  • VRRP

IPSec VPN

  • IKE version 2
  • x.509 certificates
  • Elliptic Curve Cryptography (ECC)
  • SHA2_512 support
  • AES_CBC (256), 3DES and DES
  • PFS
  • SCEP
  • DH_8192

Hardware Features


LAN Interfaces

  • 2 Gibabit Ethernet ports
  • The LAN ports can be configured as a single router interface or as separate router interfaces
  • Ethernet ports can optionally be configured for WAN use

Cellular

  • 5G SA Sub-6
  • 5G NSA Sub-6
  • LTE category 6
  • 3G UMTS support
  • Multiple concurrent APN support

WiFi

  • 2.4GHz and 5GHz concurrent WiFi
  • 2 x 2 MiMo, 802.11ac, 802.11n, 802.11p
  • Concurrent Access Point and Station mode
  • Range of optional external WiFi antennas available

Antennas

  • 4 x cellular SMA female antenna connectors for MiMo LTE support
  • 2 x RP_SMA female connectors for 2×2 MiMo WiFi (Diplexed 2.4 & %GHz channels)
  • I x GPS SMA female antenna connector with 3v3 Active power feed

SIM

  • 2 x SIM card sockets with optional slot cover

LEDs

  • Power indicator
  • Ethernet activity
  • Active SIM
  • WiFi

Approvals and Certificates

  • EN60950 safety approval
  • EN55022 and EN55024 EMC
  • EN 300 328 V1.9.1
  • EN 301 893 V2.0.7
  • E-Mark

Power

  • DC 9-36V
  • Power lead is supplied with 3 connectors for  ignition +DC and Ground
  • Automotive pulse immunity
  • Optional AC adapter available (100-240V)
  • 0.5A @ 12V DC = 6Watts

Physical and Environment

  • Unit size: 115W 111D 38H mm
  • Unit size with mounting bracket: 120W 120D 45H mm
  • Unit weight: 420g
  • Mounting bracket included for wall or DIN mounting

Operating temperature

  • -20⁰C to +70⁰C